-
Tyre warmer set >TRACK< Supersport 600, 120/70 17 & 180/55 17, temperature fixed 80 °C, 220V, blue -
Öhlins spring kit, front fork 41.5/215/10.5 N/mm, BMW S 1000 RR 2009-2018, for OEM front fork -
Torque screwdriver 0.38 Nm, fixed, for timing chain tensioner kit mechanical -
Sprocket Aluminium, silver anodised, T41, pitch 525, for forged HP rim (optional), centering diameter 70mm, hole circle 100mm, 5 holes D12mm -
Plug kit throttle valve body, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to close the activated carbon filter connectors on the throttle valve body, in combination with M Race Calibration Kit -
OZ Motorbike rear wheel Gass SBK, 6,00"x17", BMW M 1000 RR 2021- (K66), forged aluminum -
Bleeding valve M8 x1,25, thread length 16 mm, steel, gold cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock front, and rear brake caliper P2 and P4 -
Bleeding valve M8 x1,25, thread length16 mm, steel, blue cap, fits front brake master cylinder BMW S 1000 RR OEM as well as Brembo Racing M4 monoblock, and rear brake caliper P2 and P4 -
Airbox inlet tube fiberglass, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021-2022 (K66), fiberglass-prepreg-material -
Retaining plate clutch springs, BMW S 1000 RR 2019- (K67) -
Locating bolt handlebar tool, steering shaft D=15,8 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66) -
Ilmberger Carbon Winglet for left bodywork side, BMW M 1000 R 2023- (KM3) -
Öhlins TTX 25 Cartridge Kit (FKR 122), BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66) -
Gear box lever rearset, for alpha Racing footrest system, BMW S 1000 RR 2009-2018 and HP4 -
Sprocket Aluminium, gold anodised, T44, pitch 525, for racing rim, centering hole 80mm, hole circle 100mm, 5 holes d=10,2mm -
Spare part brake lever guard, black anodized -
Sticker kit headlights, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021-2022 (K66), for race fairing, bubble-free foil, UV resistant -
Front brake air ducts, BMW S 1000 RR 2019- (K67) and BMW M 1000 RR 2021-2022 (K66), carbon -
Velocity stack kit, short, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), with vortex geometry -
Hollow screw bleeding valve M10 x1, thread length 19mm, blue anodised, with cap, fits front brake calipers and rear master cylinder BMW S1000RR OEM -
Front fender SBK carbon, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021-2022 (K66), in combination with SBK fork, carbon-prepreg-material -
Öhlins Cartridge Kit TTX25 FKR 104, BMW S 1000 RR 2009-2018 and HP4 -
Sprocket Aluminium, silver anodised, T46, pitch 520, for racing rim, centering hole 80mm, hole circle 100mm, 5 holes d=10,2mm -
Adaptor plate left side, shift, for alpha Racing footrest system, for BMW S 1000 RR 2009-2018 and HP4 -
Rear sprocket, silver anodized, T=43, Pitch 525, for BMW cast, forged or carbon wheel -
Brembo brake fluid LCF 600 plus DOT4 (04816411), 0,5 liter bottle -
Rear brake line, BMW S 1000 RR 2009-2018, silver, black fittings (2xB, 2x15-20°), clear protection tube, to be used without ABS, fits alpha Racing EVO and OEM footrest system, length 630 mm -
Vacuum filling and bleeding system, 150 ml -
Conversion kit handlebar switches EVO, BMW S 1000 RR 2015-2018, plug & play for OEM wiring harness -
Akrapovic collector, stainless steel, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), spare part for Racing Line full system -
Racing gear position sensor, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), improved version for racetrack use -
Steering stopper kit SBK, BMW S 1000 RR 2019- (K67), fits to Öhlins FGR forks and SBK triple clamps -
Sprocket Aluminium, silver anodized, T=43, pitch 520, for OZ Motorbike and PVM wheel -
Safety wire stainless steel d=0.8 mm, coil 30 m -
Sprocket Aluminium, silver anodised, T43, pitch 520, for racing rim, centering hole 80mm, hole circle 100mm, 5 holes d=10,2mm -
Öhlins FGRT 202 front fork, 43 mm -
PVM Sprocket titanium, T=43, pitch 520, for OZ Motorbike and PVM wheel -
Renthal grips, hard compound, full diamond pattern -
Racing subframe light, BMW S 1000 RR 2009-2018 and HP4, replaces stock subframe, fits OEM battery and fuse box -
Winglet left side carbon, BMW M 1000 RR 2021-2022 (K66), spare part for left bodywork panel -
Akrapovic carbon muffler bracket, fits all Akrapovic exhaust systems for BMW S 1000 RR 2015-2018 -
DDC replacement control unit, replaces the OEM DDC controller when converting to conventional suspension components -
Radiator safety guard kit in stainless steel,S 1000 RR 2009-2018 (K46) and HP4, for OEM radiator and oil cooler -
Valve spring kit V4.3, BMW S 1000 RR 2009-2018, weight-optimized, surface treated -
Spacer wheel speed sensor 0,5mm, laser cut part, stainless steel -
Sprocket Aluminium, silver anodized, T=46, pitch 525, for OZ Motorbike and PVM wheel -
E-throttle kit OEM, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), aluminium housing, incl. switch unit right, for OEM wiring loom -
Clutch lever Racing short, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), folding and adjustable, length: 170 mm -
Titanium engine bolt kit, for BMW S1000 RR 2019- (K67) and M 1000 RR 2021- (K66), 90 pieces -
GBRacing engine cover protection kit, FIM homologated
